Motor gearbox

Die-casting gearProduct introduction

Gear motor is the alloy gear motor, it is defined: is the motor drive closed drive gear deceleration device (also known as the gear motor or deceleration motor), professional gear motor production plant for the motor and gearbox integrated assembly of the motor support deceleration transmission mechanism, used to reduce speed and increase torque to meet the needs of mechanical equipment work. Gear motor products with "small size, twisting force, low noise" characteristics, for the lifeblood of automation, transmission machinery enterpriseselection.

Use:

1. Reduce the speed of the motor. The speed of the motor is achieved by the gearbox, which is often said to be the output speed.

2. Increase torque. Under the same power condition, the slower the output speed gear gear motor, the greater the torque, the smaller the reverse.

3. Change the direction of transmission, for example, we can pass the force vertically to another rotating shaft with two fan gears.

4. Clutch function: We can add a brake clutch to achieve the purpose of power off immediate braking.

Performance parameters:

Motor protection rating: fully enclosed small gear deceleration motor protection rating ip54.

The insulation grade is E-class. The applicable temperature environment: -20oC TO .90C;

Suitable for humidity environment: less than 95%.

Slow-down motor housing material: 100w, 200w, 400w, 750w, 1500w,

The housing is made of aluminum alloy housing;

The housing is made of cast iron or aluminum alloy.

Small gear deceleration motor for voltage: 50Hz: 220V, 230V, 240V, 380V

Gear motors

, 400V, 415V, 60Hz: 220V, 380V, 415V.

Small gear gear reduction motor applicable to the number of poles: 2 poles, 4 poles, 6 poles, 8 poles.

Junction box protection level: IP55 waterproof aluminum alloy junction box.